The Equipment Type Required setting allows you to control whether selecting an equipment type is mandatory when creating a load. This helps ensure that loads are assigned the correct equipment when needed.

How to Enable or Disable the Equipment Type Requirement

Follow the steps below to turn this configuration on or off:

1. Go to Settings

Navigate to Settings in the system.

2. Open Default Configurations

Click on Default Configurations.

3. Go to Load Management

Locate the Load Management section.

4. Toggle Equipment Type Required

Find the Equipment Type Required option and turn it On or Off depending on your requirement.

5. Save the Changes

Click Save to apply the configuration.


 

What This Setting Does

• Enabled (On): Users must select an equipment type when creating a load. The system will not allow the load to be created without it.
• Disabled (Off): Equipment type becomes optional when creating a load.

This configuration helps maintain better load management and ensures the correct equipment is assigned when required.

We hope this article was helpful. However, if you have any further questions, please don't hesitate to reach out to our Live Support.

​